Mikrotik Router Tutorial [Part -2] :: Bandwidth Control Function

Last week we learned how to use them is a Mikrotik Router Configure besikabhabe. Today we will learn about Mikrotik Router's most popular features. Mikrotik Router is most commonly used due to which it is for the Bandwidth Control Function.

 

The last episode, we WAN (ether1) supplied by the ISP at the side Real IP, Gateway IP, DNS server IP and the LAN (ether5) a Private IP block (192.168.1.0/24) Configure the custom network 192.168.1.2, 192.168 .1.3, 192.168.1.4, 192.168.1.5, 192.168.1.6 IP learned to use. Today we learn that not all IP Bandwidth Control.

 

But first you need to change our Mikrotik Router's clock. Through winbox for the Mikrotik Router a Login.

 

Then System> Clock click. The Date, Time and Manual Time Zone fix it. Apply> OK, click.

Then click Queues. From the Simple Queues Tab + (add) and click. Notice the field below.

Name: The pisira name (whatever you like).

Target Address: The pisira IP addresses (IP Bandwidth control that you want to).

Target Upload and Target Download: The IP upload speed and download speed. Custom value as you want to, but the lower case "k" type (k = kilo bit, K = kilo byte)

Setting of this will depend largely on the user's bandwidth. 256k download if you set the user can download at maximum 32 KB speed.

Burst Limit (optional): If you think some of the more bandwidth the user to be able to use it, then what? You can enter it here.

Burst Threshold (optional): Burst bandwidth here is to determine what the minimum.

Burst Time (optional): Use the first seconds remain until the Burst bandwidth value. For example, if the 15 minutes 15 * 60 = 900

Time (optional): If you think the original Bandwidth (256k / 256k) will have a specific time when you specify the format in 4 hours. Note here that the IP of a Time Slot create such 00.00.00-07.59.59 IP then two more in the queue, specify the rest of the time slot of the day. Such 08.00.00-15.59.59 and 16.00.00-23.59.59. Otherwise, it can complicate samparakrta Bandwidth loop.

Days (optional): You can not use it on any of your Bandwidth settings say here.

For more options, click on the Advance Tab.

Parent (optional): If you wish, you can group and the queue of Bandwidth on whether any of the groups that can give. For example, at your office, Commercial, Marketing, Technical Department of the build queue, and the queue for the 3 under the parent can make another queue. And while no queue create parent (Commercial, Marketing, Technical) Select can.

 

Note here that, Child queue bandwidth limit cross of the Parent queue can not. For example, of the Commercial queue Bandwidth limit 512k / 512k, then the Child queue's never 512k / 512k Bandwidth will not be over.

Priority (optional): The IP Bandwidth Priority. By default 8. If you feel you need it most, if IP Bandwidth Priority 1 day. For example you are the Office of the Total Bandwidth 1 Mbps. Now you have 15 PC 256k / 256k set. None of these circumstances can not be simultaneously 256kbps Bandwidth. Now if you think that the other queue Bandwidth crisis Inspite of suffering from at least 1 or more queue Bandwidth them all the time, then the demand of all the queue's priority = 1 day.

 

Finally Apply> OK, click. Everything was made of 1 queue. Create the queue all IP specifications. Keep in mind that the IP is being used in your network, but you did not create the queue does not mean that all IP Bandwidth control set to Unlimited Bandwidth. The same applies if you have any queue disable (x) does.

The top of the "optional" s also only Name, Target Address, Upload and download limit Bandwidth control can be set. Advance level for use in the rest of the shot options. We'll use the other specifications of this option at Function.