Mikrotik Router Tutorial [Episode -05] :: PPPoE Server and PPPoE Client Configuration

PPPoE client Configuration: We'll start with the PPPoE Client. It would be helpful to understand the whole thing.

What is PPPoE Client?

Many of you are probably familiar with PPPoE Dialer. Especially those who use BTCL's Broadband Connection. There are also many ISP of the Client to connect via PPPoE Dialer does. This type of connection your PC becomes a PPPoE Client. Whether that is a PPPoE Server Connected to the data (Internet) are exchanged. Therefore, if such a connection, we would like to use it in our Mikrotik Router Mikrotik Router's WAN (Internet) side a Static IP instead of us will be able to configure it as the PPPoE Client. We at the Mikrotik Router BTCL's Broadband Internet Connection and be able to use any other PPPoE Connection.

PPPoE Client Configuration:

Mikrotik Router to Configure a PPPoE Client mode. Mikrotik Router log in first.
From the menu, click on the Interface. Click PPPoE Client from here.

 

Then a new window will open. Please select from the interface of the General Tab in this window. The interface cable is plugged in to the Internet.

 

Then click on the Dial Out tab. Here's your Connection Type the user name and Password.

 

Then Apply> OK, click. If your Router by using the user name and Password in the Connection and the internet to be able to dial. If your Router to your LAN settings all User PC will be shown as well as the Internet.

PPPoE Server:

A PPPoE client data or is Connected to the Internet for a PPPoE Server. If the Internet service provider that you sustain your Mikrotik Router configured as PPPoE Server can give your customers the Internet service. Survival in this case PPPoE Server and Client PC is displaying your Mikrotik Router will need to configure the PPPoE client. Dial from the PC when it's PPPoE Server and the data required to be Connected to the Internet.

MikroTik Router Tutorial. To configure the PPPoE Server Survival your Mikrotik Router Router log in first. Then click on the menu PPP. Avatar PPPOE Server tab and click. Then add (+) button and click. Now in front of you will open a window like the one below.

Service Name: A name you PPPoE Server.

 

Interface: The interface you specify that you want to set up PPPoE Server.
The rest of the options to the right as shown below.

  

This on Your Router PPPOE Server option is enabled. Create users and user profiles, this time you will have to create.

 

User Profile Creation:

For this, click on the PPP menu. Avatar Click profile. Then add (+) click on. Then you will be in front of a window. In this window, click on the General tab and the field's notice.

 

Name: Enter the name of one of these profiles.

Local Address: Enter the IP address of the Router.

DNS Server: IP address of your DNS server input specifications.

The Protocol on the side of the Settings tab to the bottom of the photo.

 

Then click on the Limits tab. Rate Limits of the house, Upload / Download of the day set as kbps. For example, has been set down to 1 Mbps Upload and Download. Here kbps mean Lower case "k" is meant.

 

Then Apply> OK, click.

Once the profile of the user to create your next job. The user name to use PPPOE Client PC / router services to Connect your router to the Internet.

 

User Creation:

PPP for the creation of the user click on the menu. Secret from here click on the tab. Then add the following (+) button and click. Then the Field's note.

 

 

Name: PPPoE Client user name. Client PC must be connected to use the name.

 

Password: PPPoE Client password. Password will be used in the Client PC Connected.

 

Service: Avatar pppoe Select service type.

 

Caller ID: If you think that this user name and password can be used only to connect to a PC, but if you wish pisira Client MAC address can be typed here. MAC bonding can now do it again later.

 

Profile: Please select your new profile. If you want more than one user at the same profile can be used. Again, for each user can be used to create different profiles. Bandwidth allocation is pppoe service profile of the user through.

 

Remote Address: An IP users through the day.
Then Apply> OK, please.

 

Now you pisisamuha Mikrotik Router Connected to your new user name and Password used when dialing via PPPoE Dialer Mikrotik Router Connected to and described in the user profile settings to Bandwidth.